|
Mechanika, Mechanika Volumes 2005: Analysis of bending processes of sheet metal parts and improving them with new investments - a Finnish case study
Autor: Ollikainen, Mikael; Varis, Juha
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Application of adaptive finite elements for solving elastic-plastic problem of SENB specimen
Autor: Kačianauskas, R.; Stupak, Eugenius; Stupak., S.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Comparison of global and local damage in reinforced concrete columns specimens
Autor: Kliukas, R.; Kačanauskas, R.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Comparison of pipe internal pressure calculation methods based on design pressure and yield strength
Autor: Bereiša, M.; Žiliukas, Antanas; Leišis, Vitalis; Jutas, Audrius; Didžiokas, Rimantas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Compromising vehicle handling and passenger ride comfort using er-damper
Autor: Mohamed, Nik Abdullah Nik; Nor, Mohd Jailani Mohd; Mukhlis, Reiza Zakia
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Convergence of lift force calculation of a tapered wing using non-linear section data
Autor: Pakalnis, Egidijus; Lasauskas, E.; Stankūnas, J.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Creation and investigation of membrane actuator for nanopositioning using laser micro-machining
Autor: Lendraitis, Vitas; Snitka, V.; Barauskas, Rimantas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Dam break flow simulation by the pseudo-concentration method
Autor: Kačeniauskas, A.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Determination of heat transfer intensity in laminar liquid film flow
Autor: Šinkūnas, Stasys; Kiela, Algimantas; Gimbutytė, I.; Šinkūnas, K.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Determination of pulse current optimal parameters for manual arc welding
Autor: Ščemeliovas, J.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Dynamic synthesis of the recoil imitation system of weapons
Autor: Fedaravičius, Algimantas; Ragulskis, Minvydas; Sližys, E.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Effect of fluor-oligomer on tribological properties of friction couples under varying loads
Autor: Padgurskas, Juozas; Skirka, Š.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Environment protection problems in the foundry industry – integrated evaluation
Autor: Holtzer, M.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Experimental investigation of low-velocity impact on woven glass-fibre-reinforced plastics composites
Autor: Keršienė, Neringa; Žiliukas, Antanas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Experimental investigation of parts vibratory alignment under kinematical excitation
Autor: Bakšys, Bronius; Baskutienė, J.; Povilionis, Algis.B.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Features of stress strain state in specimen neck at (when) computationally modeling a tension process
Autor: Bagmutov, V.; Babichev, S.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Framework of consideration productivity for assembling operations in sheet metalworking
Autor: Rimašauskas, Marius; Bargelis, Algirdas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Friction torque of a rotary shaft lip type seal - a comparison between test results and finite element simulation
Autor: Plath, Simon; Meyer, Stefan; Wollesen, V.M.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Improvement of mechanical characteristics of a cutting edge of the blade instrument by means of electromechanical processing
Autor: Bagmutov, V.P.; Parshev, S. N.; Polozenko, N. Y.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Improving theory for automatic balancing of rotating rotors with liquid self balancers
Autor: Royzman, V.; Drach, I.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Influence of multilayer beams cross-section shape on stiffness under bending
Autor: Bareišis, Jonas; Kleiza, V.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Integrated product and process development using rapid prototyping and rapid tooling technologies
Autor: Bargelis, Algirdas; Höhne, Günter; Šačkus, A.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Internal combustion engine valve gear cam wear and its influence on valve gear and engine efficiency
Autor: Vasilyev, A.; Deynichenko, E.; Popov, D.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Investigation of micro mechanic membranes with functional piezoelectric film
Autor: Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Laws of deformation processes and fracture of plastic steel from the point of view of dynamic overloading
Autor: Chausov, M. G.; Pylypenko, A.P.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Modeling and realization of manufacturing logistics network
Autor: Anužienė, Leta; Bargelis, Algirdas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Motion of a part on a horizontally vibrating plane
Autor: Bakšys, Bronius; Ramanauskytė, Kristina
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Multilayer tubular composite reinforced by a liner: behaviour under pressure loading simulation
Autor: Hocine, A.; Bezazi, A.; Boubakar, Lamine; Benamar, A.; Kondratas, A.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Numerical modeling of suspension cable kinematic displacements
Autor: Juozapaitis, A.; Norkus, Arnoldas; Grigorjeva, Tatjana
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: On direct and stepped optimization problems of flexural steel frame and their numerical realization considering strength and stiffness conditions
Autor: Karkauskas, R.; Norkus, Arnoldas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Optimization of linear precise movements
Autor: Bentkus, R.; Kasparaitis, A.; Šukys, A.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Production error distribution in sheet metal industry
Autor: Ollikainen, Mikael; Varis, Juha
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Quality of synthetic cast iron manufactured in plasma-induction furnace
Autor: Łybacki, Wojciech
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Recycling of titanium alloys in plasma furnace
Autor: Modrzyński, A.; Grześkowiak, K.; Kornacki, M.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Research and development of dosage devices for powdery products
Autor: Bubulis, A.; Jūrėnas, V.; Krančiukas, R.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Resistance to crack propagation of alloyed structural and cast steels
Autor: K. Bobyliov; Leonavičius, Mindaugas K.; Šukšta, Marijonas; Krenevičius, A.; Stupak, S.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Semi analytical modelling of reinforced concrete members in bending
Autor: Balevičius, Robertas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Strength anisotropy of railway wheels under contact load
Autor: Vasauskas, Vytautas; Bazaras, Žilvinas; Čapas, Vytautas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Strength evaluation of the steam distribution device in case of fuel channel rupture
Autor: Karalevičius, R.; Dundulis, Gintautas; Rimkevičius, Sigis; Babilas, E.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Stress and strain analysis of a bilayer composite beam with interlayer slip under hygrothermal loads
Autor: Zabulionis, Darius
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Study of hydroforming by implementing necking criterion in fem code
Autor: Gylienė, V.; Ostaševičius, Vytautas
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: The strain state of mechanically heterogeneous welded joint with the real square weld subjected to tension at plane deformation
Autor: Bražėnas, Algis; Vaičiulis, D.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: The use of ceramic materials for fluid power components
Autor: Feldmann, D. G.
Erschienen: 2005
|
|
Mechanika, Mechanika Volumes 2005: Wear of Gadfield steel-base sintered composite at current collection sliding
Autor: Fadin, V.; Aleutdinova, M.; Belyaev, S.; Tarasov, S.
Erschienen: 2005
|
Newsletter
DMG-Lib
TU Ilmenau
