|
Mechanika, Mechanika Volumes 2007: A method for impact strength estimation
Autor: Baron, A.; Bakhracheva, J.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: A simple-to-integrate formula of stress as a function of strain in concrete and its description procedure
Autor: Židonis., Ipolitas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Alternative method for the calculation of stress-strain state parameters in normal sections of structural members
Autor: Židonis, Ipolitas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Analysis of energy dissipation of shock-absorber during random excitation
Autor: Liesionis, Vaidas; Markšaitis, Donatas; Daniulaitis, Vytautas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Analysis of equivalent substitution of rectangular stress block for nonlinear stress diagram
Autor: Dulinskas, E.; Zabulionis, Darius
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Analysis the interaction of two cylindrical surfaces under shock impact load
Autor: Doroševas, Viktoras; Volkovas, Vitalijus
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Analytical and experimental studies on active suspension system of light passenger vehicle to improve ride comfort
Autor: Kumar, M. Senthil; Vijayarangan, S.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Autonomous mobile robots for outdoor tasks
Autor: Loose, H.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Breaking down the manufacturing process of sheet metal products into features
Autor: Lohtander, Mika; Lanz, Minna; Varis, Juha; Ollikainen, Mikael
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Cyclic loading effect on the mechanical behaviour and morphology of the high density polyethylene
Autor: Fatmi, Louendi; Rouili, A.; Hamlaoui, Nacira
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Decision support system framework for agile manufacturing of mechanical products
Autor: Anužienė, Leta; Bargelis, Algirdas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Development of mobile minirobots for in pipe inspection tasks
Autor: Tătar, Olimpiu; Mândru, Dan; Ardelean, Ioan
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Effect of environment temperature on fatigue properties of laminated leather
Autor: Milašienė, Daiva
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Effect of test temperature and load ratio on hydride cracking rate of Zr-2.5Nb alloy
Autor: Grybenas, A.; Makarevicius, V.; Dundulis, Gintautas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Endurance of turning tools subjected to overlay welding
Autor: Ambroza, Petras; Kavaliauskienė, Lina; Chodočinskas, Sangau
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Evaluation of friction due to deformed behaviour of rail in the electromagnetic railgun: numerical investigation
Autor: Tumonis, Liudas; Kačianauskas, R.; Kačeniauskas, A.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Experimental study of paperboard package resistance to compression
Autor: Kibirkštis, Edmundas; Lebedys, Alis; Kabelkaitė, Asta; Havenko, S.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Experimental study of polystyrene packaging compression resistance
Autor: Kibirkštis, Edmundas; Lebedys, Alis; Dabkevičius, Arturas; Maik, V.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Features of hardening of the case parts made of aluminium alloys
Autor: Matlin, M.; Lebsky, S.; Mozgunova, A.; Frolova, A.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Fracture toughness estimation by means of indentation test
Autor: Baron, A.; Bakhracheva, J.; Osipenko, A.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Hydrogen influence on fracture mechanics characteristics of zirconium alloy Zr-2.5 Nb at ambient and elevated temperatures
Autor: Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Hydrogen influence on zirconium alloy Zr-0.5Nb mechanical characteristics at ambient and elevated temperatures
Autor: Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Influence of surface hardening on low cycle tension-compression and bending durability in stress concentration zones
Autor: Daunys, Mykolas; Sabaliauskas, Arturas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Insertion simulation cylindrical parts under kinematical excitation of mobile based part
Autor: Bakšys, Bronius; Kilikevičius, Sigitas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Investigation of mechanical strength of adhesive joints of packages made from flock printing materials
Autor: Kibirkstis, Edmundas; Mizyuk, O.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Investigation of radial misalignment influence on dynamics of precise rotor system
Autor: Spruogis, B.; Turla, Vytautas; Jakštas, Arunas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Investigation of stress and strain state in concentration zones under low cycle loading
Autor: Daunys, Mykolas; Norkuvienė, Deimante
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Investigation of the single-spring lattice model in simulation of 2D solid problems by dem
Autor: Vadluga, V.; Kačianauskas, R.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Knowledge – based method for gate and cold runner definition in injection mold design
Autor: Rutkauskas, Žydrūnas; Bargelis, Algirdas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Magnetic fluid based squeeze film between porous elliptical plates
Autor: Patel, Himanshu C.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Material properties identification. Comparison of two techniques
Autor: Ragauskas, P.; Skukis, E.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Micrononhomogeneous strain of the “white layer” produced by electromechanical treatment of a carbon steels
Autor: Dudkina, N. G.; Zakharov, I. N.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Modelling deformable boundary by spherical particle for normal contact
Autor: Jasevičius, R.; Kačianauskas, R.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Modelling of the Zr-2.5Nb alloy properties with hydrides
Autor: Dundulis, Gintautas; Karalevičius, R.; Janulionis, R.; Grybenas, A.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Modified genetic algorithm for optimal design of truss structures
Autor: Šešok, D.; Belevičius, Rimantas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Nanopositioning – methods and means
Autor: Lendraitis, Vitas; Mizarienė, V.; Seniūnas, Gediminas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Nonlinear programming and optimal shakedown design of frames
Autor: Atkočiūnas, Juozas; Merkevičiūtė, Dovile; Venskus, A.; Skaržauskas, Valentinas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Numerical modelling of creep functions of laminated composites
Autor: Zabulionis, Darius; Gailius, Albinas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Numerical simulation of parts alignment under kinematical excitation
Autor: Bakšys, Bronius; Baskutienė, J.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Numerical stress analysis of granular material
Autor: Balevičius, Robertas; Markauskas, D.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Optimal shakedown design of plates
Autor: Atkočiūnas, Juozas; Rimkus, Liudvikas; Skaržauskas, Valentinas; Jarmolajeva, E.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Optimization of the vibroisolation systems of crane cabin using genetic algorithm
Autor: Kaczmarek, K.; Nowak, Andrzej
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Slider-link driven compressor (II). Simulation results
Autor: Dagilis, Vytautas; Vaitkus, Liutauras; Kirejchick, D.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Slider-link driven compressor (III). Optimization
Autor: Dagilis, Vytautas; Vaitkus, Liutauras; Balčius, Algimantas; Kirejchick, D.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Strength of copper wire connections welded by ultrasonic
Autor: Kuprys, T.; Janutėnienė, Jolanta; Didžiokas, Rimantas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Strength of differently cooled cast iron subjected to cyclic loading
Autor: Krenevičius, A.; Leonavičius, M.; Petraitis, G.; Gutauskas, M.; Stonkus, R.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Stress distribution in multilayer structural element subjected to skew bending
Autor: Bareišis, Jonas; Daniškevičiūtė, A.; Kleiza, V.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Stress strain state of mechanically heterogeneous welded joint with mild square butt weld subjected to elastic pure bending
Autor: Vaičiulis, D.; Bražėnas, A.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Study of metal structure welded on the titanium malleable alloy
Autor: Vishniakas, Ivanas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Study of the damage by acoustic emission of two laminate composites subjected to various levels of loading in three points bending
Autor: Kharoubi, Mounir; Fatmi, Louendi; Berbaoui, Rachid; Bemedakhene, Salim; Mahi, Abderrahim El
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Study of wear prediction by applying surface microgeometric parameters
Autor: Jankauskas, Vytenis; Kreivaitis, Raimondas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Surface finish quality characterisation of machined workpieces using fractal analysis
Autor: Alabi, B.; Salau, T.A.O.; Oke, S. A.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: System of automated packaging machines when closing a package with metal clips
Autor: Paulauskas, Lionginas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: The arrangement scheme and its influence on vibration process of the vehicle piston engine
Autor: Vasilyev, A.; Dolgov, K.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: The effect of nitriding on fatigue strength of structural alloys
Autor: Terent’ev, V.F.; Мichugina, М.S.; Kolmakov, A.G.; Kvedaras, Valdas; Čiuplys, Vytautas; Čiuplys, Antanas; Vilys, Jonas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: The role of friction on size segregation of granular material
Autor: Džiugys, A.; Navakas, R.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Theoretical background of automated packaging machines when closing a package with metal clips
Autor: Paulauskas, Lionginas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Theoretical background when closing a package with metal clips
Autor: Paulauskas, Lionginas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Tolerance design of multistage radial flow submersible pumps
Autor: Ragu, K.; Mohanram, P. V.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Transient characterisation and analysis of shape memory alloy wire bundles for the actuation of finger joints in prosthesis design
Autor: O’Toole, Kevin T.; McGrath, Mark M.; Hatchett, David W.
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Use of genetic algorithms in topology optimization of truss structures
Autor: Šešok, D.; Belevičius, Rimantas
Erschienen: 2007
|
|
Mechanika, Mechanika Volumes 2007: Wear behaviour of CBN tool when turning hardened AISI D3 steel
Autor: Bouchelaghem, H.; Yallese, M.A.; Amirat, A.; Belhadi., S.
Erschienen: 2007
|
Newsletter
DMG-Lib
TU Ilmenau
