|
|
Csibi, Vencel (1945 - )
|
|
Romanian Professor
Csibi Vencel-Iosif was born in Cluj-Napoca, Romania, on March 7th 1945. He graduated Institutul Politehnic din Cluj-Napoca (Universitatea Tehnica din Cluj-Napoca), Romania, in 1974 and got the degree of mechanical engineer, specialist in Machine Construction Technology. Afterwards, he was employed for 4 years at an industrial company. Since 1978 he has begun his academic career, starting as a university assistant at the Mechanisms Department of Universitatea Tehnica din Cluj-Napoca. In 1990 he got the Ph.D. degree in Mechanisms Science at Universitatea Tehnica din Cluj-Napoca. Csibi Vemcel-Iosif is professor since 2000. His most relevant research fields are mechanisms, special gears, helical pumps and compressors, machines and installations of precision mechanics. Professor Csibi published 8 books, 4 laboratory work manuals, over 90 scientific papers, 4 technical patents, by himself or as coauthor. He took part in development of 40 research contracts, in 3 of them being general manager. Professor Csibi is member in a lot of professional or scientific associations, such as IFToMM - International Federation for Science of Machines and Mechanisms; ARoTMM - Romanian Association for Machine and Mechanisms Theory, ARR - Robotics Association of Romania, AMFOR - Association for Precision Mechanics and Optics of Romania, SROMECA - Romanian Society for Mechatronics; MTA – Technology and Materials Science Section of Hungarian Academy of Science, KAB - Academic Committee of Cluj-Napoca; AGIR - General Association of Engineers in Romania, EMT – Hungarian Technical and Scientific Society of Transilvania.
|
| |
|
|
Schreibweisen:
Csibi, Vencel
|
| |
|
|
|
Lebenslauf
|
|
|
* 07.03.1945
|
Cluj-Napoca, Romania
|
geboren
|
|
1974
|
Cluj-Napoca, Romania
|
Engineer
|
|
1974 - 1978
|
Aiud Romania
|
Engineer
|
|
1978
|
Cluj-Napoca, Romania
|
Assistent
|
|
1990
|
Cluj-Napoca, Romania
|
PhD
|
|
1990
|
Cluj-Napoca, Romania
|
Lecturer
|
|
1992
|
Cluj-Napoca, Romania
|
Associate Professor
|
|
1998
|
Miskolc Hungary
|
Visiting Professor
|
|
2000
|
Cluj-Napoca, Romania
|
Professor
|
|
2005 - 2007
|
Gyor Hungary
|
Visiting Professor
|
|
|
| Sammlungen |
| |
|
| Literatur |
| |
|
Determinarea deplasării de profil şi a cercului de rostogolire la angrenarea cremalierei şi a roţi cu profile oarecare, in: Simpozionul de mecanisme şi organe de maşini. Proiectarea asistată de calculator. PRASIC 1982
Autor: Maros, Dezideriu; Orban, Gheorghe; Csibi, Vencel
Erschienen: 1982
|
|
Determinarea diametrului exterior minim al melcului infasurator la generarea unei roti dintate cilindrice cu profil oarecare, in: Simpozionul de mecanisme şi organe de maşini. Proiectarea asistată de calculator. PRASIC 1982
Autor: Maros, Dezideriu; Orban, Gheorghe; Csibi, Vencel; Damian, Liana; Damian, M.
Erschienen: 1982
|
|
Studii numerice referitoare la posibilitatea prelucrării unor suprafeţe elicoidale prin metoda vartejului, in: Simpozionul de Mecanisme şi Organe de maşini (3, 1986, Braşov)
Autor: Csibi, Vencel
Erschienen: 1986
|
|
Acţionarea mesei complexe de la microscoapele I.O.R. cu motoare pas cu pas comandate de un microcalculator., in: Simpozionul de Mecanisme și Transmisii Mecanice. MTM (5, 1988, Cluj-Napoca)
Autor: Csibi, Vencel; Bocu, M.; Selinger, S.; Tudoran, M.; Vaida, M.
Erschienen: 1988
|
|
Aspecte privind optimizarea profilului camelor pentru o variantă de cronosecţiune optimă a motorului D-109 B, in: Simpozionul de Mecanisme și Transmisii Mecanice. MTM (5, 1988, Cluj-Napoca)
Autor: Căzilă, A.; Bataga, N.; Ardelean, Ioan; Csibi, Vencel
Erschienen: 1988
|
|
Determinarea profilelor de generare reciprocă ale ferezi disc şi melcului cu profil oarecare prin reducerea la o problemă plană, in: Simpozionul de Mecanisme și Transmisii Mecanice. MTM (5, 1988, Cluj-Napoca)
Autor: Damian, M.; Csibi, Vencel; Rusu, V.
Erschienen: 1988
|
|
Consideraţii privind optimizarea profilului camelor polidine, in: Simpozion Naţional Proiectarea asistată de calculator în domeniul mecanismelor şi organelor de maşini (4, 1990, Braşov)
Autor: Csibi, Vencel; Căzilă, Aurica; Băţagă, Nicolae
Erschienen: 1990
|
|
Proiectarea angrenajelor cilindrice cu dinţi înclinaţi cu rapoarte mari de reducere, in: Simpozionul de Mecanisme și Transmisii Mecanice. MTM (7,1996, Reșița)
Autor: Dali, A.; Csibi, Vencel
Erschienen: 1996
|
|
Angrenaj cicloidal cu bolţuri cu joc radial reglabil, in: Simpozionul Naţional Mecanisme, Tribologie, Organe de maşini, Transmisii mecanice, Design de produs (7, 2002, Braşov)
Autor: Csibi, Vencel; Teuţan, Emil; Barbu, Dan; Bodizs, Edit
Erschienen: 2002
|
|
A Cycloidal Drive with Adjustable Radial Backlash, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Autor: Csibi, Vencel; Teuţan, Emil; Noveanu, Simona; Chira, R.; Szancsali, C.
Erschienen: 2004
|
|
Analysis of Compliant Mechanisms Using Finite Element, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Autor: Noveanu, Simona; Csibi, Vencel; Noveanu, D.
Erschienen: 2004
|
|
The FEM Analysis of compliant Mechanisms, in: Scientific Bulletin of the „Politehnica” University of Timişoara. Transactions on Mechanics, International Conference on Mechanisms and Mechanical Transmissions. MTM (10, 2008, Timișoara)
Autor: Noveanu, Simona; Lungu, Ion; Csibi, Vencel
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2009: Study of design, kinematics and accuracy modelling of 3 degrees of freedom robot
Autor: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel; Bălan, Radu
Erschienen: 2009
|
|
Mechanika, Mechanika Volumes 2011: Design, workspace analysis and inverse kinematics problem of Delta parallel robot
Autor: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel
Erschienen: 2011
|
|
| Bilder |
| |
|
| Permanentlinks |
| |
|
Newsletter
DMG-Lib
Europeana
