 Ansicht vergrößern
|
Assistant Professor in the Department of Mechanical Engineering of the Faculty of Engineering in Bilbao, UPV/EHU.
He was born in Bilbao in 1979 and finished his M.Sc. in Mechanical Engineering at the Faculty of Engineering in Bilbao in 2004. Also in 2004, he started his professional career in the Inmotion Unit at ROBOTIKER-Tecnalia Technology Centre and, simultaneously, he began his doctoral studies at the Department of Mechanical Engineering. In 2008, he joined the research staff as a member of the COMPMECH Research Group in the University of the Basque Country where he also works as Associate professor. Since 2010 he is a full-time lecturer at the University College of Technical Industrial Engineering in Bilbao, University of the Basque Country. In 2011 he received his Ph.D. for a research work in the field of robotics.
|
| |
|
|
Schreibweisen:
Corral Saiz, Javier
|
| |
|
|
|
Lebenslauf
|
|
|
* 03.12.1979
|
Bilbao, Spain
|
geboren
|
|
2004
|
Bilbao, Spain
|
He obtained a degree in Mechanical Engineering from the Faculty of Engineering of Bilbao, University of the Basque Country (UPV/EHU).
|
|
2004
|
Zamudio, Spain
|
He worked as Researcher at the ROBOTIKER-Tecnalia Technology Center in the automotive field.
|
|
2006
|
Bilbao, Spain
|
He obtained the Certificate of Advanced Studies in Mechanical Engineering and Structural Systems.
|
|
2008
|
Bilbao, Spain
|
He started working as Associate Profesor at the Department of Mechanical Engineering of the Engineering School of Bilbao (UPV/EHU).
|
|
2009
|
Bilbao, Spain
|
He started working as Assistant professor at the Department of Mechanical Engineering of the University College of Technical Industrial Engineering of Bilbao (UPV/EHU).
|
|
2009
|
Bilbao, Spain
|
He started working as Researcher at COMPMECH group (UPV/EHU) in the the field of robotics.
|
|
2011
|
Bilbao, Spain
|
He obtained a Ph.D. in Mechanical Engineering from the University of the Basque Country (UPV/EHU).
|
|
|
| |
|
Análisis del comportamiento cinemático-estructural de mecanismos espaciales. aplicación a los mecanismos de cinemática paralela, in: Anales de Ingeniería Mecánica, Anales de Ingeniería Mecánica Año 15 Vol. 3
Autor: Ispizua, E.; Pinto Cámara, Charles; Corral Saiz, Javier; del Pozo, D.; López González, Jesus Maria
Erschienen: 2004
|
|
Complete manufacturing process of a Parallel Kinematics Manipulator (Presentation), in: Compmech research group
Autor: Corral Saiz, Javier; Ispizua, E.; Pinto Cámara, Charles; del Pozo, D.; López Martínez, J.M.; Altuzarra Maestre, Oscar; Hernández Frías, Alfonso
Erschienen: 2004
|
|
ESTUDIO Y SIMULACIÓN DEL PROBLEMA DE POSICIÓN CON UN PROTOTIPO DE CINEMÁTICA PARALELA PLANO DE 3 GDL (Presentation), in: Compmech research group
Autor: Corral Saiz, Javier; del Pozo, D.; López Martínez, J.M.; Pinto Cámara, Charles; Altuzarra Maestre, Oscar
Erschienen: 2005
|
|
Experimental evaluation of static stiffness of a spatial translational parallel kinematics manipulator (Presentation), in: Compmech research group
Autor: Corral Saiz, Javier; Pinto Cámara, Charles; Altuzarra Maestre, Oscar; Petuya Arcocha, Victor; del Pozo, D.; López Martínez, J.M.
Erschienen: 2006
|
|
Lower-mobility parallel manipulators static and dynamic-structural behaviour analysis (Presentation)
Autor: Corral Saiz, Javier
Erschienen: 2006
|
|
An introduction to the Design of Experiments (DOE) tools applied to the PKMs structural analysis behavior (Presentation)
Autor: Corral Saiz, Javier
Erschienen: 2007
|
|
Síntesis Morfológica de un Manipulador Paralelo para Pick & Place
Autor: Altuzarra Maestre, Oscar; Salgado Picón, Oscar; Hernández Frías, Alfonso; Corral Saiz, Javier
Erschienen: 2008
|
|
Structural dynamic analysis in lower-mobility parallel manipulators (Presentation)
Autor: Corral Saiz, Javier
Erschienen: 2008
|
|
CIBIM9_Poster_Análisis Dinámico Estructural de PKM
Autor: Pinto Cámara, Charles; Corral Saiz, Javier
Erschienen: 2009
|
|
Structural statics and dynamics in lower-mobility parallel manipulators (Presentation 2009)
Autor: Corral Saiz, Javier
Erschienen: 2009
|
|
A procedure to obtein the structural workspace based on stiffness and natural frequencies criteria (Presentation)
Autor: Corral Saiz, Javier; Pinto Cámara, Charles; Zubizarreta Pico, Asier; Altuzarra Maestre, Oscar
Erschienen: 2010
|
|
Un procedimiento para la obtención de espacios de trabajo basado en criterios estructurales
Autor: Pinto Cámara, Charles; Corral Saiz, Javier; Hernández Frías, Alfonso; Ceccarelli, Marco
Erschienen: 2010
|
|
Un procedimiento para la obtención de espacios de trabajo basado en criterios estructurales (Presentation)
, in: Compmech research group, III Workshop of the COMPMECH research group
Autor: Pinto Cámara, Charles; Corral Saiz, Javier; Hernández Frías, Alfonso; Ceccarelli, Marco
Erschienen: 2010
|
|
Caracterización del comportamiento estructural de manipuladores de cinemática paralela
Autor: Corral Saiz, Javier
Erschienen: 2011
|
|
Vibratory dynamic behaviour of parallel manipulators in their workspace, in: Final program // Thirteenth World Congress in Mechanism and Machine Science, Vibrations
Autor: Corral Saiz, Javier; Herrero, Saioa; Pinto Cámara, Charles; Sandru, Bogdan Dumitru
Erschienen: 2011
|
|
Newsletter
DMG-Lib
Europeana
