Mechanika: Mechanika Volumes 2007

Full-text is not available at the moment

Informazioni generali
Autore	Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas; Jasevičius, R.; Kačianauskas, R.; Vadluga, V.; Dagilis, Vytautas; Vaitkus, Liutauras; Balčius, Algimantas; Kirejchick, D.; Džiugys, A.; Navakas, R.; Jankauskas, Vytenis; Kreivaitis, Raimondas; Šešok, D.; Belevičius, Rimantas; Dulinskas, E.; Zabulionis, Darius; Paulauskas, Lionginas; Vaičiulis, D.; Bražėnas, A.; Kumar, M. Senthil; Vijayarangan, S.; Lohtander, Mika; Lanz, Minna; Varis, Juha; Ollikainen, Mikael; Baron, A.; Bakhracheva, J.; Osipenko, A.; Kuprys, T.; Janutėnienė, Jolanta; Didžiokas, Rimantas; Fatmi, Louendi; Rouili, A.; Hamlaoui, Nacira; Tătar, Olimpiu; Mândru, Dan; Ardelean, Ioan; Ambroza, Petras; Kavaliauskienė, Lina; Chodočinskas, Sangau; Židonis., Ipolitas; Balevičius, Robertas; Markauskas, D.; Dudkina, N. G.; Zakharov, I. N.; Milašienė, Daiva; Židonis, Ipolitas; Bakšys, Bronius; Baskutienė, J.; Loose, H.; Kibirkštis, Edmundas; Lebedys, Alis; Dabkevičius, Arturas; Maik, V.; Kabelkaitė, Asta; Havenko, S.; Atkočiūnas, Juozas; Rimkus, Liudvikas; Skaržauskas, Valentinas; Jarmolajeva, E.; Krenevičius, A.; Leonavičius, M.; Petraitis, G.; Gutauskas, M.; Stonkus, R.; Grybenas, A.; ...
Pubblicato	Kaunas University of Technology, Kaunas, 2007
edizione
Volume
ISBN

Collections

		Altre pubblicazioni
		2000 ed oltre

Superordinate work

Mechanika
Autore: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Pubblicato: 1995-

Parts

	Mechanika, Mechanika Volumes 2007: Hydrogen influence on zirconium alloy Zr-0.5Nb mechanical characteristics at ambient and elevated temperatures Autore: Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Modelling deformable boundary by spherical particle for normal contact Autore: Jasevičius, R.; Kačianauskas, R. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Investigation of the single-spring lattice model in simulation of 2D solid problems by dem Autore: Vadluga, V.; Kačianauskas, R. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Slider-link driven compressor (III). Optimization Autore: Dagilis, Vytautas; Vaitkus, Liutauras; Balčius, Algimantas; Kirejchick, D. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: The role of friction on size segregation of granular material Autore: Džiugys, A.; Navakas, R. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Study of wear prediction by applying surface microgeometric parameters Autore: Jankauskas, Vytenis; Kreivaitis, Raimondas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Use of genetic algorithms in topology optimization of truss structures Autore: Šešok, D.; Belevičius, Rimantas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Analysis of equivalent substitution of rectangular stress block for nonlinear stress diagram Autore: Dulinskas, E.; Zabulionis, Darius Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: System of automated packaging machines when closing a package with metal clips Autore: Paulauskas, Lionginas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Stress strain state of mechanically heterogeneous welded joint with mild square butt weld subjected to elastic pure bending Autore: Vaičiulis, D.; Bražėnas, A. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Analytical and experimental studies on active suspension system of light passenger vehicle to improve ride comfort Autore: Kumar, M. Senthil; Vijayarangan, S. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Breaking down the manufacturing process of sheet metal products into features Autore: Lohtander, Mika; Lanz, Minna; Varis, Juha; Ollikainen, Mikael Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Fracture toughness estimation by means of indentation test Autore: Baron, A.; Bakhracheva, J.; Osipenko, A. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Strength of copper wire connections welded by ultrasonic Autore: Kuprys, T.; Janutėnienė, Jolanta; Didžiokas, Rimantas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Cyclic loading effect on the mechanical behaviour and morphology of the high density polyethylene Autore: Fatmi, Louendi; Rouili, A.; Hamlaoui, Nacira Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Development of mobile minirobots for in pipe inspection tasks Autore: Tătar, Olimpiu; Mândru, Dan; Ardelean, Ioan Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Endurance of turning tools subjected to overlay welding Autore: Ambroza, Petras; Kavaliauskienė, Lina; Chodočinskas, Sangau Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Theoretical background of automated packaging machines when closing a package with metal clips Autore: Paulauskas, Lionginas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: A simple-to-integrate formula of stress as a function of strain in concrete and its description procedure Autore: Židonis., Ipolitas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Theoretical background when closing a package with metal clips Autore: Paulauskas, Lionginas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Numerical stress analysis of granular material Autore: Balevičius, Robertas; Markauskas, D. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Micrononhomogeneous strain of the “white layer” produced by electromechanical treatment of a carbon steels Autore: Dudkina, N. G.; Zakharov, I. N. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Effect of environment temperature on fatigue properties of laminated leather Autore: Milašienė, Daiva Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Alternative method for the calculation of stress-strain state parameters in normal sections of structural members Autore: Židonis, Ipolitas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Numerical simulation of parts alignment under kinematical excitation Autore: Bakšys, Bronius; Baskutienė, J. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Autonomous mobile robots for outdoor tasks Autore: Loose, H. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Experimental study of polystyrene packaging compression resistance Autore: Kibirkštis, Edmundas; Lebedys, Alis; Dabkevičius, Arturas; Maik, V. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Experimental study of paperboard package resistance to compression Autore: Kibirkštis, Edmundas; Lebedys, Alis; Kabelkaitė, Asta; Havenko, S. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Optimal shakedown design of plates Autore: Atkočiūnas, Juozas; Rimkus, Liudvikas; Skaržauskas, Valentinas; Jarmolajeva, E. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Strength of differently cooled cast iron subjected to cyclic loading Autore: Krenevičius, A.; Leonavičius, M.; Petraitis, G.; Gutauskas, M.; Stonkus, R. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Effect of test temperature and load ratio on hydride cracking rate of Zr-2.5Nb alloy Autore: Grybenas, A.; Makarevicius, V.; Dundulis, Gintautas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Study of the damage by acoustic emission of two laminate composites subjected to various levels of loading in three points bending Autore: Kharoubi, Mounir; Fatmi, Louendi; Berbaoui, Rachid; Bemedakhene, Salim; Mahi, Abderrahim El Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Analysis of energy dissipation of shock-absorber during random excitation Autore: Liesionis, Vaidas; Markšaitis, Donatas; Daniulaitis, Vytautas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Hydrogen influence on fracture mechanics characteristics of zirconium alloy Zr-2.5 Nb at ambient and elevated temperatures Autore: Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Modelling of the Zr-2.5Nb alloy properties with hydrides Autore: Dundulis, Gintautas; Karalevičius, R.; Janulionis, R.; Grybenas, A. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Transient characterisation and analysis of shape memory alloy wire bundles for the actuation of finger joints in prosthesis design Autore: O’Toole, Kevin T.; McGrath, Mark M.; Hatchett, David W. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Tolerance design of multistage radial flow submersible pumps Autore: Ragu, K.; Mohanram, P. V. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Surface finish quality characterisation of machined workpieces using fractal analysis Autore: Alabi, B.; Salau, T.A.O.; Oke, S. A. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Investigation of radial misalignment influence on dynamics of precise rotor system Autore: Spruogis, B.; Turla, Vytautas; Jakštas, Arunas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: The arrangement scheme and its influence on vibration process of the vehicle piston engine Autore: Vasilyev, A.; Dolgov, K. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Nonlinear programming and optimal shakedown design of frames Autore: Atkočiūnas, Juozas; Merkevičiūtė, Dovile; Venskus, A.; Skaržauskas, Valentinas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Features of hardening of the case parts made of aluminium alloys Autore: Matlin, M.; Lebsky, S.; Mozgunova, A.; Frolova, A. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Influence of surface hardening on low cycle tension-compression and bending durability in stress concentration zones Autore: Daunys, Mykolas; Sabaliauskas, Arturas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Numerical modelling of creep functions of laminated composites Autore: Zabulionis, Darius; Gailius, Albinas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Magnetic fluid based squeeze film between porous elliptical plates Autore: Patel, Himanshu C. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Analysis the interaction of two cylindrical surfaces under shock impact load Autore: Doroševas, Viktoras; Volkovas, Vitalijus Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Insertion simulation cylindrical parts under kinematical excitation of mobile based part Autore: Bakšys, Bronius; Kilikevičius, Sigitas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Wear behaviour of CBN tool when turning hardened AISI D3 steel Autore: Bouchelaghem, H.; Yallese, M.A.; Amirat, A.; Belhadi., S. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Optimization of the vibroisolation systems of crane cabin using genetic algorithm Autore: Kaczmarek, K.; Nowak, Andrzej Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: The effect of nitriding on fatigue strength of structural alloys Autore: Terent’ev, V.F.; Мichugina, М.S.; Kolmakov, A.G.; Kvedaras, Valdas; Čiuplys, Vytautas; Čiuplys, Antanas; Vilys, Jonas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Investigation of stress and strain state in concentration zones under low cycle loading Autore: Daunys, Mykolas; Norkuvienė, Deimante Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Investigation of mechanical strength of adhesive joints of packages made from flock printing materials Autore: Kibirkstis, Edmundas; Mizyuk, O. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Evaluation of friction due to deformed behaviour of rail in the electromagnetic railgun: numerical investigation Autore: Tumonis, Liudas; Kačianauskas, R.; Kačeniauskas, A. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Nanopositioning – methods and means Autore: Lendraitis, Vitas; Mizarienė, V.; Seniūnas, Gediminas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Stress distribution in multilayer structural element subjected to skew bending Autore: Bareišis, Jonas; Daniškevičiūtė, A.; Kleiza, V. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Slider-link driven compressor (II). Simulation results Autore: Dagilis, Vytautas; Vaitkus, Liutauras; Kirejchick, D. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Study of metal structure welded on the titanium malleable alloy Autore: Vishniakas, Ivanas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Knowledge – based method for gate and cold runner definition in injection mold design Autore: Rutkauskas, Žydrūnas; Bargelis, Algirdas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Decision support system framework for agile manufacturing of mechanical products Autore: Anužienė, Leta; Bargelis, Algirdas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Modified genetic algorithm for optimal design of truss structures Autore: Šešok, D.; Belevičius, Rimantas Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: Material properties identification. Comparison of two techniques Autore: Ragauskas, P.; Skukis, E. Pubblicato: 2007
	Mechanika, Mechanika Volumes 2007: A method for impact strength estimation Autore: Baron, A.; Bakhracheva, J. Pubblicato: 2007