Mechanika: Mechanika Volumes 2009

Full-text is not available at the moment

Informazioni generali
Autore	Ryynänen, Ville; Ratava, Juho; Lindh, Tuomo; Rikkonen, Mikko; Sihvo, Inga; Leppänen, Johanna; Varis, Juha; Bode, Florin; Giurgea, Corina; Hodor, Victor; Unguresan., Paula; Bručas, D.; Sužiedelytė-Vysockienė, J.; Belabed, L.; Yahiaoui, J.; Zennir, Abdel Malek; Benyaghla, H.; Grigas, Vytautas; Legha, Aleksandra; Toločka, R. T.; Kreivaitis, Raimondas; Padgurskas, Juozas; Jankauskas, Vytenis; Kupčinskas, Arturas; Makarevičienė, Violeta; Gumbytė, Milda; Bakšys, Bronius; Ramanauskytė, Kristina; Povilionis, Algis B.; Menail, Younes; Mahi, Abderrahim El; Assarar, Mustapha; Redjel, B.; Kondratas, A.; Pacurari, Radu; Csizar, A.; Brisan, Cornel; Giniotis, Vytautas; Šiaudinytė, Lauryna; Šinkūnas, Stasys; Kiela, Algimantas; Muckus, K.; Juodžbalienė, V.; Kriščiukaitis, Algimantas; Pukėnas, K.; Škikas, L.; Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Šurna, R.; Barauskas, Rimantas; Daunys, Mykolas; Stulpinaitė, A.; Karabegović, I.; Hrnjica, B.; Bražėnas, Algis; Vaičiulis, Dainius; Doroševas, Viktoras; Volkovas, Vitalijus; Yifei, Tong; Dongbo, Li; Fei, Yu; Yong, He; Маtlin, M.; Kazаnkinа, E.; Kаzаnkin, V.; Stan, Sergiu-D.; Bălan, Radu; ...
Pubblicato	Kaunas University of Technology, Kaunas, 2009
edizione
Volume
ISBN

Collections

		Altre pubblicazioni
		2000 ed oltre

Superordinate work

Mechanika
Autore: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Pubblicato: 1995-

Parts

	Mechanika, Mechanika Volumes 2009: Chip control system for monitoring the breaking of chips and elimination of continuous chips in rough turning Autore: Ryynänen, Ville; Ratava, Juho; Lindh, Tuomo; Rikkonen, Mikko; Sihvo, Inga; Leppänen, Johanna; Varis, Juha Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of the nonreactive flow in a swirling burner Autore: Bode, Florin; Giurgea, Corina; Hodor, Victor; Unguresan., Paula Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Limited accuracy reference free angular position determination Autore: Bručas, D.; Sužiedelytė-Vysockienė, J. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Mechanical behaviour of reinforced earth retaining walls Autore: Belabed, L.; Yahiaoui, J.; Zennir, Abdel Malek; Benyaghla, H. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Simulation possibilities of controlled rowing force generated by hydraulic loading unit of training facility Autore: Grigas, Vytautas; Legha, Aleksandra; Toločka, R. T. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Tribological behavior of rapeseed oil mixtures with mono- and diglycerides Autore: Kreivaitis, Raimondas; Padgurskas, Juozas; Jankauskas, Vytenis; Kupčinskas, Arturas; Makarevičienė, Violeta; Gumbytė, Milda Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Vibratory manipulation of elastically unconstrained part on a horizontal plane Autore: Bakšys, Bronius; Ramanauskytė, Kristina; Povilionis, Algis B. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: The effects of water aging on the mechanical properties of glass-fiber and kevlar-fiber epoxy composite materials Autore: Menail, Younes; Mahi, Abderrahim El; Assarar, Mustapha; Redjel, B.; Kondratas, A. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Basic aspects concerning modular design of reconfigurable parallel manipulators for assembly tasks at nanoscale Autore: Pacurari, Radu; Csizar, A.; Brisan, Cornel Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Arrangement for vertical angle calibration of geodetic instruments Autore: Giniotis, Vytautas; Bručas, D.; Šiaudinytė, Lauryna Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Effect of the temperature gradient on heat transfer and friction in laminar liquid film Autore: Šinkūnas, Stasys; Kiela, Algimantas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: The gastrocnemius muscle stiffness and human balance stability Autore: Muckus, K.; Juodžbalienė, V.; Kriščiukaitis, Algimantas; Pukėnas, K.; Škikas, L. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: A new technique for the creation of a higher accuracy 3D geometrical model of the human masticatory system Autore: Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Šurna, R.; Barauskas, Rimantas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Statistical evaluation of low cycle durability for corrosion and heat-resistant steels welded joints materials at room and elevated temperature Autore: Daunys, Mykolas; Stulpinaitė, A. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Simulation of industrial robots for laser welding of load bearing construction Autore: Karabegović, I.; Hrnjica, B. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Determination of stresses and strains in two-layer mechanically inhomogeneous pipe subjected to internal pressure at elastic plastic loading Autore: Bražėnas, Algis; Vaičiulis, Dainius Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of adequacy of the analytical model of sound field in rectangular room Autore: Doroševas, Viktoras; Volkovas, Vitalijus Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Finite element analysis of three-hole socket with a shutter Autore: Yifei, Tong; Dongbo, Li; Fei, Yu; Yong, He Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Mechanics of initial dot contact Autore: Маtlin, M.; Kazаnkinа, E.; Kаzаnkin, V. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Kinematics and fuzzy control of ISOGLIDE3 medical parallel robot Autore: Stan, Sergiu-D.; Bălan, Radu; Mătieş, Vistrian; Rad, Cipri Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Researching the behaviour of movable two-cutter blocks in case of skiving apertures Autore: Karshakov, M. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Experimental investigations and analysis of compressor’s friction losses Autore: Dagilis, Vytautas; Vaitkus, Liutauras Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Experimental investigation of welding of aluminum alloys profiles and wrought plate by FSW Autore: Kah, Paul; Hiltunen, Esa; Martikainen, Jukka; Katajisto, Jari Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of adequacy of the acoustical field model Autore: Mikalauskas, Robertas; Volkovas, Vitalijus Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Tips for shear force microscopy fabricated by controlled etching Autore: Limanauskas, Leopoldas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: A new algorithm for helical gear design with addendum modification Autore: Antal, Tiberiu Alexandru Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: The Smart Stick adaptive structure Autore: Pilkauskas, Kestutis; Gaidys, Rimvydas; Lira, C. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Posturographic study of the human body vibrations for clinical diagnostics of the spine and joint pathology Autore: Kizilova, N.; Karpinsky, M.; Griškevičius, Julius; Daunoravičienė, Kristina Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Effects of spot welding on the functionality of thin-wall elements of car‘s deformation zone Autore: Juodvalkis, D.; Sapragonas, Jonas; Griškevičius, Paulius Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Stability analysis of steel frames with variable cross-section for sports and entertainment centre Autore: Samofalov, Michail; Šlivinskas, Tomas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Load distribution in the threaded joint subjected to bending Autore: Krenevičius, A.; Juchnevičius, Ž. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Hydraulic machine wear control by working regime Autore: Zdankus, Narimantas T.; Kargaudas, Vytautas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Study of resonant vibrations shapes of the beam type piezoelectric actuator with preloaded mass Autore: Mažeika, Dalius; Bansevičius, Ramutis Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Surface roughness model in turning hardened hot work steel using mixed ceramic tool Autore: Fnides, B.; Yallese, M. A.; Mabrouki, Tarek; Rigal, Jean-Francois Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Analysis of the variation of metals mechanical properties depending on operation time Autore: Janutėnienė, Jolanta; Didžiokas, Rimantas; Gintalas, M. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Elastic solution of axisymmetric thick truncated conical shells based on first-order shear deformation theory Autore: Ghannad, Mehdi; Nejad, Mohammad Zamani; Rahimi, G. H. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: The stress state in two-layer hollow cylindrical bars Autore: Partaukas, N.; Bareišis, Jonas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Method for a direct calculation of stress-strain state parameters at normal right-angled sections of structural members given curvilinear stress diagrams Autore: Židonis, Ipolitas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Research of mine imitator interaction with deformable surface Autore: Fedaravičius, Algimantas; Šaulys, Povilas; Griškevičius, Paulius Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of compression of cylindrical packages Autore: Kibirkštis, Edmundas; Bivainis, Vaidas; Ragulskis, L.; Dabkevičius, Arturas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: About cutting forces for skiving by a movable two-blade block Autore: Кarshakov, М.; Kostadinov, V. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Evaluation of gear power losses from experimental test data and analytical methods Autore: Łazarz, Boguslaw; Wojnar, Grzegorz; Madej, Henryk; Czech, Piotr Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: On the safety prediction of deteriorating structures Autore: Kudzys, A.; Lukoševičienė, O. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Comparison of dynamic behaviour of EMA-3 railgun under differently induced loadings Autore: Tumonis, Liudas; Schneider, M.; Kačianauskas, R.; Kačeniauskas, A. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Manufacture parameters of thermal insulation slabs from secondary raw materials Autore: Janulaitis, Tadas; Paulauskas, Lionginas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of friction properties of yarns from natural fibres Autore: Svetnickienė, Vaida; Čiukas, Ricardas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Design and virtual reality simulation of frontal - sinusoidal ball transmission Autore: Bara, M.; Stan, Sergiu-D.; Teuţan, Emil; Verdes, Dan Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Process modeling for quality in order-handled manufacturing system Autore: Čikotienė, Dalia; Bargelis, Algirdas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Analysis of estimation and compensation of angular errors of linear motion Autore: Barakauskas, A.; Kasparaitis, A.; Kaušinis, Saulius; Lazdinas, R. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Identification of muscles forces during gait of children with foot disabilities Autore: Michnik, Robert; Jurkojć, Jacek; Pauk, J. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Dependence of ultimate tensile strength of friction stir welded AA2024-T6 aluminium alloy on friction stir welding process parameters Autore: Sundaram, N. Shanmuga; Murugan, N. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Formation of MEMS nanocomposit layers and investigation of their mechanical properties Autore: Ponelytė, Sigita; Prosyčevas, Igoris; Guobienė, Asta; Balčiūnas, Rokas; Puišo, Judita Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Characteristics of lubrication at nano scale on the performance of transversely rough slider bearing Autore: Patel, Himanshu C.; Deheri, G. M. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Unstable simulator of academic rowing Autore: Domeika, Aurelijus; Grigas, Vytautas; Žiliukas, Pranas; Vilkauskas, Andrius Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Lattice-based six-spring discrete element model for discretisation problems of 2D isotropic and anisotropic solids Autore: Kačianauskas, R.; Vadluga, V. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of drivers poses influence to the intervertebral forces in the junction of thoracic and lumbar spinal curves Autore: Rukuiža, Egidijus; Eidukynas, Valdas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Parametric analysis of hermetic refrigeration compressors Autore: Dagilis, Vytautas; Vaitkus, Liutauras Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Set of field equations for thick shell of revolution made of functionally graded materials in curvilinear coordinate system Autore: Nejad, Mohammad Zamani; Rahimi, G. H.; Ghannad, Mehdi Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Low cycle stress strain curves and fatigue under tension-compression and torsion Autore: Daunys, Mykolas; Česnavičius, Ramunas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Experiments and simulations of ultrasonically assisted turning tool Autore: Rimkevičienė, J.; Ostaševičius, Vytautas; Jūrėnas, Vytautas; Gaidys, Rimvydas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Cracking threshold of the welded joints subjected to high-cyclic loading Autore: Stonkus, R.; Leonavičius, M.; Krenevičius, A. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Study of design, kinematics and accuracy modelling of 3 degrees of freedom robot Autore: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel; Bălan, Radu Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of low cycle fatigue crack opening by finite element method Autore: Jakušovas, Alius; Daunys, Mykolas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Mechanical behaviour of machined polyethylene filaments subjected to aggressive chemical environments Autore: Rehab-Bekkouche, S.; Ghabeche, Wafia; Kaddeche, Mounia; Kiass, N.; Chaoui, K. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Influence of carburized surface on plastic properties of steel during tempering Autore: Janutienė, R. Kandrotaitė Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Computation of turbulent channel flow with variable spacing riblets Autore: Benhamza, M. E.; Belaid, F. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of thermal stability of holographic plate Autore: Janušas, Giedrius; Palevičius, Arvydas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: An analysis of beam elongation influence to postbuckling displacements under displacement dependent axial forc Autore: Doleček, V.; Isić, Safet; Voloder, A. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of vibrations of a multilayered polymeric film Autore: Ragulskis, Kazimieras; Dabkevičius, Arturas; Kibirkštis, Edmundas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Investigation of contact behaviour of elastic layered spheres by FEM Autore: Garjonis, Jonas; Kačianauskas, R.; Stupak, Eugenius; Vadluga, V. Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Mutual positioning of automatically assembled noncylindrical parts Autore: Bakšys, Bronius; Sokolova, Tatjana Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Intelligent model for painting process and cost forecasting Autore: Mankute, Rasa; Bargelis, Algirdas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Research of quality impact to the product design properties and characteristics Autore: Čikotienė, Dalia; Bargelis, Algirdas Pubblicato: 2009
	Mechanika, Mechanika Volumes 2009: Modeling of sound propagation in the closed space and its interaction with obstacles Autore: Mikalauskas, Robertas; Volkovas, Vitalijus Pubblicato: 2009