spre pagina principală a DMG-Lib
Acasă  · Harta site-ului  · Contact  ·
DMG-Lib Acasă + Noutăţi
Răsfoire
Căutare
Experimentaţi DMG-Lib
About us
Ajutor
 		 
Căutare avansată   Căutare mecanism

Metodología para la predicción de la estabilidad dinámica en el mecanizado de alta velocidad de suelos delgados
thumbnail
Dokument öffnen (benötigt JavaScript)   Deschide documentul

Informaţii generale
Autor Campa Gómez, Francisco Javier
Publicat  Universidad del País Vasco, Bilbao, 2009
Ediţie  
Detaliază  
ISBN
Abstract Metodología para la predicción de la estabilidad dinámica en el mecanizado de alta velocidad de suelos delgados.
Metodología para la predicción de la estabilidad dinámica en el mecanizado de alta velocidad de suelos delgados.Tesis doctoral desarrollada en la Universidad del País Vasco por Francisco Javier Campa.
Collections
Publicaţii ştiinţifice
2000 şi ulterior
Imagini
 
Distribution of cutting forces on a cutting edge with a lead angle of 90º and 45º
Click pentru a mări
Stability lobes diagram, spindle speed-chatter frequency diagram and spindle speed-phase diagrama
Click pentru a mări
Relation between the obtained critical depth of cut and the estimated one in several machine tools
Click pentru a mări
Tolerance in the estimation of the stability lobes
Click pentru a mări
Influence of the tool vibration over the real chip thickness.
Click pentru a mări
Flip and Hopf lobes in the stability diagram of a milling with a tool with 2 cutting edges
Click pentru a mări
Frequency response functions measured at the tool tip
Click pentru a mări
Stability lobes in full immersion milling for 4 types of toolholder.
Click pentru a mări
Milling strategies for industrial marots machining with thin walls
Click pentru a mări
Materials used in the Boeing 77 of 2003 and in the 787 Dreamliner
Click pentru a mări
Evolution of the material in the monolithic components machining process
Click pentru a mări
Machining chatter marks in a thin floor and a thin wall of monolithic parts
Click pentru a mări
Main parameters in the study of the oblique cutting mechanics
Click pentru a mări
Diagram of the basic parameters of milling
Click pentru a mări
Discretization of an end mill cutting edge in differential elements and representation of the cutting forces
Click pentru a mări
Cutting forces on a differential element of the cutting edge of a bullnose end mill
Click pentru a mări
Cutting forces in milling on a tool with 9 tooth and corresponding Fourier analysis
Click pentru a mări
Influence of the radial depth of cut over the harmonic content of the Fourier spectrum in a milling of Aluminum 7075T6
Click pentru a mări
Influence of the helix angle on the shape of the cutting forces and the harmonic content of the Fourier analysis
Click pentru a mări
Comparison of the Frequency Response Functions experimentally measured at the tool tip for a milling machine structure, and two end mills with an overhang-diameter relation of 4:1 and 7:1
Click pentru a mări
Example of the influence of the helix angle on the final geometry of a walll milled with and end mill of 4 teeth and an helix angle of 45º.
Click pentru a mări
Chip width in a turning operation and in a milling operation with a tool with inserts.
Click pentru a mări
Simulation in time domain of the stabilizing effect of the nonlinearities that appear during a unstable milling
Click pentru a mări
Representation of the damping effect.
Click pentru a mări
Chip thickness variation, the cutting speed, the helix angle and the shearing cutting coefficients in a ball end mill of diameter of 12 mm
Click pentru a mări
Chatter vibration marks in an Inconel 718 turned part and a milled L type part of Aluminum 7075.
Click pentru a mări
Frequency content of the signal of an accelerometer in a unstable milling due to regenerative chatter
Click pentru a mări
Fourier spectrum, displacement vs. time, synchronized signal with the tooth passing frequency and Pincaré diagram.
Click pentru a mări
Fourier spectrum, displacement vs. time, synchronized signal and Poincare diagram of a stable milling vibration signal.
Click pentru a mări
Fourier spectrum, displacement vs. time, synchronized signal and Poincare diagram.
Click pentru a mări
Vacuum fixtres for the routing and drilling of components for the aerobautical industry. Active bed-shape fixture based Universal Holding Fixtures from Kostyrka
Click pentru a mări
Conventional end mill, end mill with variable pitch, and end mill with variable helix angle
Click pentru a mări
Example of reduction of the vibration severity in and 87% by means of a (SSSV)
Click pentru a mări
Stability lobes diagram: Influence of the relation 'chatter frequency-tooth passing frequency'
Click pentru a mări
Influence of the process damping effect on the stability lobes diagram
Click pentru a mări
1 Degree of freedom model for orthogonal turning.
Click pentru a mări
Influence of the cutting mode on the stability lobes diagrams
Click pentru a mări
Influence of the milling mode on the stability diagrams for a system
Click pentru a mări
Transformation of the FRFs matrix in cartesian coordinates to the loacl axis of the tool, depedent on the feed direction.
Click pentru a mări
Variation of the stability lobes diagrama shape with the feed direction: Comparison of the lobes from two designs of a universal milling machine
Click pentru a mări
Left) Polar diagram 'Critical depth of cut-Feed direction. Right) Optimized milling strategy based on the use of the polar diagram.
Click pentru a mări
Influence of the workpiece material on the stability lobes
Click pentru a mări
Influence of the number of teeth of a tool in the stability lobes diagram
Click pentru a mări
Effect of the helix angle on the stability lobes shape.
Click pentru a mări
Effect of maintaining the stiffness while varying the mass
Click pentru a mări
Influence of the variation of the stiffness while making the modal mass constant
Click pentru a mări
Effect of a variable damping on the FRFs and the stability lobes
Click pentru a mări
Variation of the stability lobes of a universal milling machine inside the workspace
Click pentru a mări
First modal frequency vs. spindle speed
Click pentru a mări
Stability diagram calculated with the FRF measured at 0 rpm and at several spindle speeds.
Click pentru a mări
Jump-to-jump strategy on a thin wall and detail of the difference in height of the tool
Click pentru a mări
Fourier spectrum of an unstable milling of a thin floor
Click pentru a mări
Fourier spectrum of an unstable milling
Click pentru a mări
Surface of a thin wall after an unstable and a stable milling
Click pentru a mări
Steps on the surface of the thin floor
Click pentru a mări
Influence of the dynamic displacements in Z direction on the chip thickness.
Click pentru a mări
Representation of two effects to consider in the study of chatter when milling thin floors: a) Cut of the secondary edge due to the penetration of the edge into the part. b) Interferences between the part and the edges out of the cutting area.
Click pentru a mări
Stable milling of a part flexible in the tool axis direction: vibration and tooth impacts go in phase and the surface is free of marks.
Click pentru a mări
Unstable milling due to period doubling chatter
Click pentru a mări
Unstable milling due to period doubling chatter. Part II
Click pentru a mări
Unstable milling due to period doubling chatter
Click pentru a mări
Unstable milling due to period doubling chatter
Click pentru a mări
Unstable milling due to period doubling chatter
Click pentru a mări
Projection of the displacements in x,y and z over the chip thickness
Click pentru a mări
Direction of the forces on the cutting edge of an insert and a bull nose end mill.
Click pentru a mări
Stability lobes diagram and chatter frequencies diagram for 1 and 3 harmonics
Click pentru a mări
Stability lobes and frequency-velocity for 5 and 15 harmonics
Click pentru a mări
Computational time as a function of the number of harmonics
Click pentru a mări
Stability lobes diagram for 0, 1 and 5 harmonics.
Click pentru a mări
Chatter frequencies diagram for 0,1,3,5 and 15 armonics
Click pentru a mări
Comparison of methods to obtain stability diagrams: Chebyshev, single-frequency and multi-frequency.
Click pentru a mări
Comparison of computational times between some solutions.
Click pentru a mări
Aproximation of [Altintas, 2001] for circular inserts.
Click pentru a mări
Linearization of the cutting edge lead angle for each axial depth of cut
Click pentru a mări
Parameters used in the averaging of the lead angle and the cutting coefficients
Click pentru a mări
Variation of the section of the chip as a function of the dynamic chip thickness
Click pentru a mări
Variation of the averaged cutting edge lead angle
Click pentru a mări
Variation of the cutting edge lead angle averaged
Click pentru a mări
Left) Experimental device and modal parameters. Right) Stability diagram and experimental results
Click pentru a mări
Mean roughness, surface and Fourier spectrum of the tests performed. Part I
Click pentru a mări
Mean roughness, surface and Fourier spectrum of the tests performed. Part II
Click pentru a mări
Second experimental device and corresponding modal parameters
Click pentru a mări
Results of the comparison of averaging methods: Method 3, method 2 and method 1
Click pentru a mări
Influence on the stability diagram of an error of 10% on the cutting coefficients, the relative damping and the stiffness
Click pentru a mări
Solution of the averaging method 3 when the mode is in axial direction or in radial direction
Click pentru a mări
Algorithm for the obtention of a tridimensional lobes diagram. Part I
Click pentru a mări
Algorithm for the obtention of a tridimensional lobes diagram
Click pentru a mări
Stability diagram and stable spindle speeds
Click pentru a mări
Contour stability diagram and colorbar
Click pentru a mări
Angular acceleration of two spindles with and without position encoder: Faemat (red) and Kessler (blue)
Click pentru a mări
Critical depth of cut- Bulk of material diagram.
Click pentru a mări
Critical depth of cut-Dynamic stiffness diagram for several radial depths of cut.
Click pentru a mări
Detail of the aluminum plate and the testprobe.
Click pentru a mări
3 axis machining center Kondia HS 1000.
Click pentru a mări
Dominant modes of the testprobe and FRFs
Click pentru a mări
Stability diagrams of the milling of the testpart
Click pentru a mări
Experimental results: stable, unstable and slightly unstable
Click pentru a mări
Accelerometer signal and Fourier spectrums in points 1, 3 and 5
Click pentru a mări
Accelerometer signal and Fourier spectrums in points 1, 3 and 5
Click pentru a mări
Ampliation of the stability diagrama at a depth of cut of 4 mm.
Click pentru a mări
Accelerometer signal in the milling of the testpart
Click pentru a mări
Surface after an unstable milling.
Click pentru a mări
Geometry and dimensions of the testpart 'Aerosfin'.
Click pentru a mări
Milling strategy tested in the thin floor cutting.
Click pentru a mări
Dynamometric plate Kistler© 9255B and amplifier Kistler© 5017B
Click pentru a mări
Measurement of the FRF of the floor
Click pentru a mări
Surface roughness measurement and section made to the testpart.
Click pentru a mări
Left) Evolution of the first modal frequencies in the 8 steps.Right) Mesh of the part
Click pentru a mări
a) Detail of the nodes used for the comparison. b) Gzz in pints 1,2,3. c) Gyy in points 1,2,3. d) Gzz in pints 4,5,6. e) Gyy in points 4,5,6.
Click pentru a mări
Left) Lobes obhtained from the Gzz in points 1-3 and from points 4-6. Right) Comparisonm of the lobes calculated from Gzz in points 1 and 4 and the ones calculated considering Gxx, Gyy and the crossed FRFs in 1 and 4.
Click pentru a mări
Distribution of the relative dampings calculated by modal fitting.
Click pentru a mări
Evolution of the modulus of the FRFs (m/N) durinf the milling of the testpart
Click pentru a mări
Comparison between the FRFs calculated by MEF (red) and the experimentally obtained ones (blue).
Click pentru a mări
Stability diagrams: From experimantal FRFs (blue) and calculated from FRFs estimated by FEM (red).
Click pentru a mări
Final surface of the milled testpat with a initial bulk of material of 5 mm at 24.000 rpm: Mean roughness Ra in microns and detail of the marks.
Click pentru a mări
Final surface of the testpart with a bulk of material of 5 mm and machined varying the spindle speed: mean roughness Ra and detail of the marks.
Click pentru a mări
Left) Evolution of the experimental FRF. Right) Stability diagram for the machining with a bulk of material of 6 mm.
Click pentru a mări
Final surface of the test milled woth a bluk of material of 6 mm at 24000 rpm: mean roughness Ra in microns and detail of the marks.
Click pentru a mări
Final surface of the test with a bulk of material of 6 mm and milled varying the spindle speed: mean roughness Ra and detail of the marks.
Click pentru a mări
Mean roughness Ra measured in each test part with the maximum deviation with respect to that value
Click pentru a mări
Influence of an error ef 10% in the relative damping, the stiffness and the cutting coefficients
Click pentru a mări
Critical depth of cut-Bulk of material diagram in the step P4 of the Aerosfin test part.
Click pentru a mări
Final surface of the part machined with a bulk of material of 8 mm at 24000 rpm: mean roughness Ra in microns and detail of the marks.
Click pentru a mări
Final surface of the part milled with a bulk of material of 9 mm at 24000 rpm.
Click pentru a mări
Final surface of the test part in the step 4 with a bulk of material of 5 mm, 6 mm, 8 mm and 9 mm.
Click pentru a mări
Critical depth of cut-Dynamic stiffness diagram
Click pentru a mări
Linked items
Images: Final surface of the part milled with a bulk of material of 9 mm at 24000 rpm.
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?docum=13367009
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_docum_13367009.html
Data provider
UBCUniv. Basque C.  http://www.ehu.es/compmech/welcome/Home.html
Administrative information
Time of publication 2009

nach oben sus
Informaţii despre corporaţie  · Asigurarea confidenţialităţii datelor  · Condiţii de utilizare      
×