| |
|
Mechanika
Autor: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Publicat: 1995-
|
|
| |
|
Mechanika, Mechanika Volumes 2009: Chip control system for monitoring the breaking of chips and elimination of continuous chips in rough turning
Autor: Ryynänen, Ville; Ratava, Juho; Lindh, Tuomo; Rikkonen, Mikko; Sihvo, Inga; Leppänen, Johanna; Varis, Juha
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of the nonreactive flow in a swirling burner
Autor: Bode, Florin; Giurgea, Corina; Hodor, Victor; Unguresan., Paula
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Limited accuracy reference free angular position determination
Autor: Bručas, D.; Sužiedelytė-Vysockienė, J.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mechanical behaviour of reinforced earth retaining walls
Autor: Belabed, L.; Yahiaoui, J.; Zennir, Abdel Malek; Benyaghla, H.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Simulation possibilities of controlled rowing force generated by hydraulic loading unit of training facility
Autor: Grigas, Vytautas; Legha, Aleksandra; Toločka, R. T.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Tribological behavior of rapeseed oil mixtures with mono- and diglycerides
Autor: Kreivaitis, Raimondas; Padgurskas, Juozas; Jankauskas, Vytenis; Kupčinskas, Arturas; Makarevičienė, Violeta; Gumbytė, Milda
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Vibratory manipulation of elastically unconstrained part on a horizontal plane
Autor: Bakšys, Bronius; Ramanauskytė, Kristina; Povilionis, Algis B.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: The effects of water aging on the mechanical properties of glass-fiber and kevlar-fiber epoxy composite materials
Autor: Menail, Younes; Mahi, Abderrahim El; Assarar, Mustapha; Redjel, B.; Kondratas, A.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Basic aspects concerning modular design of reconfigurable parallel manipulators for assembly tasks at nanoscale
Autor: Pacurari, Radu; Csizar, A.; Brisan, Cornel
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Arrangement for vertical angle calibration of geodetic instruments
Autor: Giniotis, Vytautas; Bručas, D.; Šiaudinytė, Lauryna
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Effect of the temperature gradient on heat transfer and friction in laminar liquid film
Autor: Šinkūnas, Stasys; Kiela, Algimantas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: The gastrocnemius muscle stiffness and human balance stability
Autor: Muckus, K.; Juodžbalienė, V.; Kriščiukaitis, Algimantas; Pukėnas, K.; Škikas, L.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: A new technique for the creation of a higher accuracy 3D geometrical model of the human masticatory system
Autor: Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Šurna, R.; Barauskas, Rimantas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Statistical evaluation of low cycle durability for corrosion and heat-resistant steels welded joints materials at room and elevated temperature
Autor: Daunys, Mykolas; Stulpinaitė, A.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Simulation of industrial robots for laser welding of load bearing construction
Autor: Karabegović, I.; Hrnjica, B.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Determination of stresses and strains in two-layer mechanically inhomogeneous pipe subjected to internal pressure at elastic plastic loading
Autor: Bražėnas, Algis; Vaičiulis, Dainius
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of adequacy of the analytical model of sound field in rectangular room
Autor: Doroševas, Viktoras; Volkovas, Vitalijus
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Finite element analysis of three-hole socket with a shutter
Autor: Yifei, Tong; Dongbo, Li; Fei, Yu; Yong, He
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mechanics of initial dot contact
Autor: Маtlin, M.; Kazаnkinа, E.; Kаzаnkin, V.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Kinematics and fuzzy control of ISOGLIDE3 medical parallel robot
Autor: Stan, Sergiu-D.; Bălan, Radu; Mătieş, Vistrian; Rad, Cipri
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Researching the behaviour of movable two-cutter blocks in case of skiving apertures
Autor: Karshakov, M.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Experimental investigations and analysis of compressor’s friction losses
Autor: Dagilis, Vytautas; Vaitkus, Liutauras
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Experimental investigation of welding of aluminum alloys profiles and wrought plate by FSW
Autor: Kah, Paul; Hiltunen, Esa; Martikainen, Jukka; Katajisto, Jari
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of adequacy of the acoustical field model
Autor: Mikalauskas, Robertas; Volkovas, Vitalijus
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Tips for shear force microscopy fabricated by controlled etching
Autor: Limanauskas, Leopoldas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: A new algorithm for helical gear design with addendum modification
Autor: Antal, Tiberiu Alexandru
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: The Smart Stick adaptive structure
Autor: Pilkauskas, Kestutis; Gaidys, Rimvydas; Lira, C.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Posturographic study of the human body vibrations for clinical diagnostics of the spine and joint pathology
Autor: Kizilova, N.; Karpinsky, M.; Griškevičius, Julius; Daunoravičienė, Kristina
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Effects of spot welding on the functionality of thin-wall elements of car‘s deformation zone
Autor: Juodvalkis, D.; Sapragonas, Jonas; Griškevičius, Paulius
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Stability analysis of steel frames with variable cross-section for sports and entertainment centre
Autor: Samofalov, Michail; Šlivinskas, Tomas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Load distribution in the threaded joint subjected to bending
Autor: Krenevičius, A.; Juchnevičius, Ž.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Hydraulic machine wear control by working regime
Autor: Zdankus, Narimantas T.; Kargaudas, Vytautas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Study of resonant vibrations shapes of the beam type piezoelectric actuator with preloaded mass
Autor: Mažeika, Dalius; Bansevičius, Ramutis
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Surface roughness model in turning hardened hot work steel using mixed ceramic tool
Autor: Fnides, B.; Yallese, M. A.; Mabrouki, Tarek; Rigal, Jean-Francois
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Analysis of the variation of metals mechanical properties depending on operation time
Autor: Janutėnienė, Jolanta; Didžiokas, Rimantas; Gintalas, M.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Elastic solution of axisymmetric thick truncated conical shells based on first-order shear deformation theory
Autor: Ghannad, Mehdi; Nejad, Mohammad Zamani; Rahimi, G. H.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: The stress state in two-layer hollow cylindrical bars
Autor: Partaukas, N.; Bareišis, Jonas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Method for a direct calculation of stress-strain state parameters at normal right-angled sections of structural members given curvilinear stress diagrams
Autor: Židonis, Ipolitas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Research of mine imitator interaction with deformable surface
Autor: Fedaravičius, Algimantas; Šaulys, Povilas; Griškevičius, Paulius
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of compression of cylindrical packages
Autor: Kibirkštis, Edmundas; Bivainis, Vaidas; Ragulskis, L.; Dabkevičius, Arturas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: About cutting forces for skiving by a movable two-blade block
Autor: Кarshakov, М.; Kostadinov, V.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Evaluation of gear power losses from experimental test data and analytical methods
Autor: Łazarz, Boguslaw; Wojnar, Grzegorz; Madej, Henryk; Czech, Piotr
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: On the safety prediction of deteriorating structures
Autor: Kudzys, A.; Lukoševičienė, O.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Comparison of dynamic behaviour of EMA-3 railgun under differently induced loadings
Autor: Tumonis, Liudas; Schneider, M.; Kačianauskas, R.; Kačeniauskas, A.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Manufacture parameters of thermal insulation slabs from secondary raw materials
Autor: Janulaitis, Tadas; Paulauskas, Lionginas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of friction properties of yarns from natural fibres
Autor: Svetnickienė, Vaida; Čiukas, Ricardas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Design and virtual reality simulation of frontal - sinusoidal ball transmission
Autor: Bara, M.; Stan, Sergiu-D.; Teuţan, Emil; Verdes, Dan
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Process modeling for quality in order-handled manufacturing system
Autor: Čikotienė, Dalia; Bargelis, Algirdas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Analysis of estimation and compensation of angular errors of linear motion
Autor: Barakauskas, A.; Kasparaitis, A.; Kaušinis, Saulius; Lazdinas, R.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Identification of muscles forces during gait of children with foot disabilities
Autor: Michnik, Robert; Jurkojć, Jacek; Pauk, J.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Dependence of ultimate tensile strength of friction stir welded AA2024-T6 aluminium alloy on friction stir welding process parameters
Autor: Sundaram, N. Shanmuga; Murugan, N.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Formation of MEMS nanocomposit layers and investigation of their mechanical properties
Autor: Ponelytė, Sigita; Prosyčevas, Igoris; Guobienė, Asta; Balčiūnas, Rokas; Puišo, Judita
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Characteristics of lubrication at nano scale on the performance of transversely rough slider bearing
Autor: Patel, Himanshu C.; Deheri, G. M.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Unstable simulator of academic rowing
Autor: Domeika, Aurelijus; Grigas, Vytautas; Žiliukas, Pranas; Vilkauskas, Andrius
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Lattice-based six-spring discrete element model for discretisation problems of 2D isotropic and anisotropic solids
Autor: Kačianauskas, R.; Vadluga, V.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of drivers poses influence to the intervertebral forces in the junction of thoracic and lumbar spinal curves
Autor: Rukuiža, Egidijus; Eidukynas, Valdas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Parametric analysis of hermetic refrigeration compressors
Autor: Dagilis, Vytautas; Vaitkus, Liutauras
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Set of field equations for thick shell of revolution made of functionally graded materials in curvilinear coordinate system
Autor: Nejad, Mohammad Zamani; Rahimi, G. H.; Ghannad, Mehdi
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Low cycle stress strain curves and fatigue under tension-compression and torsion
Autor: Daunys, Mykolas; Česnavičius, Ramunas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Experiments and simulations of ultrasonically assisted turning tool
Autor: Rimkevičienė, J.; Ostaševičius, Vytautas; Jūrėnas, Vytautas; Gaidys, Rimvydas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Cracking threshold of the welded joints subjected to high-cyclic loading
Autor: Stonkus, R.; Leonavičius, M.; Krenevičius, A.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Study of design, kinematics and accuracy modelling of 3 degrees of freedom robot
Autor: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel; Bălan, Radu
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of low cycle fatigue crack opening by finite element method
Autor: Jakušovas, Alius; Daunys, Mykolas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mechanical behaviour of machined polyethylene filaments subjected to aggressive chemical environments
Autor: Rehab-Bekkouche, S.; Ghabeche, Wafia; Kaddeche, Mounia; Kiass, N.; Chaoui, K.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Influence of carburized surface on plastic properties of steel during tempering
Autor: Janutienė, R. Kandrotaitė
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Computation of turbulent channel flow with variable spacing riblets
Autor: Benhamza, M. E.; Belaid, F.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of thermal stability of holographic plate
Autor: Janušas, Giedrius; Palevičius, Arvydas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: An analysis of beam elongation influence to postbuckling displacements under displacement dependent axial forc
Autor: Doleček, V.; Isić, Safet; Voloder, A.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of vibrations of a multilayered polymeric film
Autor: Ragulskis, Kazimieras; Dabkevičius, Arturas; Kibirkštis, Edmundas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of contact behaviour of elastic layered spheres by FEM
Autor: Garjonis, Jonas; Kačianauskas, R.; Stupak, Eugenius; Vadluga, V.
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mutual positioning of automatically assembled noncylindrical parts
Autor: Bakšys, Bronius; Sokolova, Tatjana
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Intelligent model for painting process and cost forecasting
Autor: Mankute, Rasa; Bargelis, Algirdas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Research of quality impact to the product design properties and characteristics
Autor: Čikotienė, Dalia; Bargelis, Algirdas
Publicat: 2009
|
|
Mechanika, Mechanika Volumes 2009: Modeling of sound propagation in the closed space and its interaction with obstacles
Autor: Mikalauskas, Robertas; Volkovas, Vitalijus
Publicat: 2009
|
|
Newsletter
DMG-Lib
Ilmenau TU
