| |
|
Mechanika
Author: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Published: 1995-
|
|
| |
|
Mechanika, Mechanika Volumes 2009: Chip control system for monitoring the breaking of chips and elimination of continuous chips in rough turning
Author: Ryynänen, Ville; Ratava, Juho; Lindh, Tuomo; Rikkonen, Mikko; Sihvo, Inga; Leppänen, Johanna; Varis, Juha
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of the nonreactive flow in a swirling burner
Author: Bode, Florin; Giurgea, Corina; Hodor, Victor; Unguresan., Paula
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Limited accuracy reference free angular position determination
Author: Bručas, D.; Sužiedelytė-Vysockienė, J.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mechanical behaviour of reinforced earth retaining walls
Author: Belabed, L.; Yahiaoui, J.; Zennir, Abdel Malek; Benyaghla, H.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Simulation possibilities of controlled rowing force generated by hydraulic loading unit of training facility
Author: Grigas, Vytautas; Legha, Aleksandra; Toločka, R. T.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Tribological behavior of rapeseed oil mixtures with mono- and diglycerides
Author: Kreivaitis, Raimondas; Padgurskas, Juozas; Jankauskas, Vytenis; Kupčinskas, Arturas; Makarevičienė, Violeta; Gumbytė, Milda
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Vibratory manipulation of elastically unconstrained part on a horizontal plane
Author: Bakšys, Bronius; Ramanauskytė, Kristina; Povilionis, Algis B.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: The effects of water aging on the mechanical properties of glass-fiber and kevlar-fiber epoxy composite materials
Author: Menail, Younes; Mahi, Abderrahim El; Assarar, Mustapha; Redjel, B.; Kondratas, A.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Basic aspects concerning modular design of reconfigurable parallel manipulators for assembly tasks at nanoscale
Author: Pacurari, Radu; Csizar, A.; Brisan, Cornel
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Arrangement for vertical angle calibration of geodetic instruments
Author: Giniotis, Vytautas; Bručas, D.; Šiaudinytė, Lauryna
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Effect of the temperature gradient on heat transfer and friction in laminar liquid film
Author: Šinkūnas, Stasys; Kiela, Algimantas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: The gastrocnemius muscle stiffness and human balance stability
Author: Muckus, K.; Juodžbalienė, V.; Kriščiukaitis, Algimantas; Pukėnas, K.; Škikas, L.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: A new technique for the creation of a higher accuracy 3D geometrical model of the human masticatory system
Author: Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Šurna, R.; Barauskas, Rimantas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Statistical evaluation of low cycle durability for corrosion and heat-resistant steels welded joints materials at room and elevated temperature
Author: Daunys, Mykolas; Stulpinaitė, A.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Simulation of industrial robots for laser welding of load bearing construction
Author: Karabegović, I.; Hrnjica, B.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Determination of stresses and strains in two-layer mechanically inhomogeneous pipe subjected to internal pressure at elastic plastic loading
Author: Bražėnas, Algis; Vaičiulis, Dainius
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of adequacy of the analytical model of sound field in rectangular room
Author: Doroševas, Viktoras; Volkovas, Vitalijus
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Finite element analysis of three-hole socket with a shutter
Author: Yifei, Tong; Dongbo, Li; Fei, Yu; Yong, He
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mechanics of initial dot contact
Author: Маtlin, M.; Kazаnkinа, E.; Kаzаnkin, V.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Kinematics and fuzzy control of ISOGLIDE3 medical parallel robot
Author: Stan, Sergiu-D.; Bălan, Radu; Mătieş, Vistrian; Rad, Cipri
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Researching the behaviour of movable two-cutter blocks in case of skiving apertures
Author: Karshakov, M.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Experimental investigations and analysis of compressor’s friction losses
Author: Dagilis, Vytautas; Vaitkus, Liutauras
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Experimental investigation of welding of aluminum alloys profiles and wrought plate by FSW
Author: Kah, Paul; Hiltunen, Esa; Martikainen, Jukka; Katajisto, Jari
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of adequacy of the acoustical field model
Author: Mikalauskas, Robertas; Volkovas, Vitalijus
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Tips for shear force microscopy fabricated by controlled etching
Author: Limanauskas, Leopoldas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: A new algorithm for helical gear design with addendum modification
Author: Antal, Tiberiu Alexandru
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: The Smart Stick adaptive structure
Author: Pilkauskas, Kestutis; Gaidys, Rimvydas; Lira, C.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Posturographic study of the human body vibrations for clinical diagnostics of the spine and joint pathology
Author: Kizilova, N.; Karpinsky, M.; Griškevičius, Julius; Daunoravičienė, Kristina
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Effects of spot welding on the functionality of thin-wall elements of car‘s deformation zone
Author: Juodvalkis, D.; Sapragonas, Jonas; Griškevičius, Paulius
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Stability analysis of steel frames with variable cross-section for sports and entertainment centre
Author: Samofalov, Michail; Šlivinskas, Tomas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Load distribution in the threaded joint subjected to bending
Author: Krenevičius, A.; Juchnevičius, Ž.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Hydraulic machine wear control by working regime
Author: Zdankus, Narimantas T.; Kargaudas, Vytautas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Study of resonant vibrations shapes of the beam type piezoelectric actuator with preloaded mass
Author: Mažeika, Dalius; Bansevičius, Ramutis
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Surface roughness model in turning hardened hot work steel using mixed ceramic tool
Author: Fnides, B.; Yallese, M. A.; Mabrouki, Tarek; Rigal, Jean-Francois
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Analysis of the variation of metals mechanical properties depending on operation time
Author: Janutėnienė, Jolanta; Didžiokas, Rimantas; Gintalas, M.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Elastic solution of axisymmetric thick truncated conical shells based on first-order shear deformation theory
Author: Ghannad, Mehdi; Nejad, Mohammad Zamani; Rahimi, G. H.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: The stress state in two-layer hollow cylindrical bars
Author: Partaukas, N.; Bareišis, Jonas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Method for a direct calculation of stress-strain state parameters at normal right-angled sections of structural members given curvilinear stress diagrams
Author: Židonis, Ipolitas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Research of mine imitator interaction with deformable surface
Author: Fedaravičius, Algimantas; Šaulys, Povilas; Griškevičius, Paulius
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of compression of cylindrical packages
Author: Kibirkštis, Edmundas; Bivainis, Vaidas; Ragulskis, L.; Dabkevičius, Arturas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: About cutting forces for skiving by a movable two-blade block
Author: Кarshakov, М.; Kostadinov, V.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Evaluation of gear power losses from experimental test data and analytical methods
Author: Łazarz, Boguslaw; Wojnar, Grzegorz; Madej, Henryk; Czech, Piotr
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: On the safety prediction of deteriorating structures
Author: Kudzys, A.; Lukoševičienė, O.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Comparison of dynamic behaviour of EMA-3 railgun under differently induced loadings
Author: Tumonis, Liudas; Schneider, M.; Kačianauskas, R.; Kačeniauskas, A.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Manufacture parameters of thermal insulation slabs from secondary raw materials
Author: Janulaitis, Tadas; Paulauskas, Lionginas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of friction properties of yarns from natural fibres
Author: Svetnickienė, Vaida; Čiukas, Ricardas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Design and virtual reality simulation of frontal - sinusoidal ball transmission
Author: Bara, M.; Stan, Sergiu-D.; Teuţan, Emil; Verdes, Dan
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Process modeling for quality in order-handled manufacturing system
Author: Čikotienė, Dalia; Bargelis, Algirdas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Analysis of estimation and compensation of angular errors of linear motion
Author: Barakauskas, A.; Kasparaitis, A.; Kaušinis, Saulius; Lazdinas, R.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Identification of muscles forces during gait of children with foot disabilities
Author: Michnik, Robert; Jurkojć, Jacek; Pauk, J.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Dependence of ultimate tensile strength of friction stir welded AA2024-T6 aluminium alloy on friction stir welding process parameters
Author: Sundaram, N. Shanmuga; Murugan, N.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Formation of MEMS nanocomposit layers and investigation of their mechanical properties
Author: Ponelytė, Sigita; Prosyčevas, Igoris; Guobienė, Asta; Balčiūnas, Rokas; Puišo, Judita
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Characteristics of lubrication at nano scale on the performance of transversely rough slider bearing
Author: Patel, Himanshu C.; Deheri, G. M.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Unstable simulator of academic rowing
Author: Domeika, Aurelijus; Grigas, Vytautas; Žiliukas, Pranas; Vilkauskas, Andrius
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Lattice-based six-spring discrete element model for discretisation problems of 2D isotropic and anisotropic solids
Author: Kačianauskas, R.; Vadluga, V.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of drivers poses influence to the intervertebral forces in the junction of thoracic and lumbar spinal curves
Author: Rukuiža, Egidijus; Eidukynas, Valdas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Parametric analysis of hermetic refrigeration compressors
Author: Dagilis, Vytautas; Vaitkus, Liutauras
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Set of field equations for thick shell of revolution made of functionally graded materials in curvilinear coordinate system
Author: Nejad, Mohammad Zamani; Rahimi, G. H.; Ghannad, Mehdi
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Low cycle stress strain curves and fatigue under tension-compression and torsion
Author: Daunys, Mykolas; Česnavičius, Ramunas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Experiments and simulations of ultrasonically assisted turning tool
Author: Rimkevičienė, J.; Ostaševičius, Vytautas; Jūrėnas, Vytautas; Gaidys, Rimvydas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Cracking threshold of the welded joints subjected to high-cyclic loading
Author: Stonkus, R.; Leonavičius, M.; Krenevičius, A.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Study of design, kinematics and accuracy modelling of 3 degrees of freedom robot
Author: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel; Bălan, Radu
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of low cycle fatigue crack opening by finite element method
Author: Jakušovas, Alius; Daunys, Mykolas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mechanical behaviour of machined polyethylene filaments subjected to aggressive chemical environments
Author: Rehab-Bekkouche, S.; Ghabeche, Wafia; Kaddeche, Mounia; Kiass, N.; Chaoui, K.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Influence of carburized surface on plastic properties of steel during tempering
Author: Janutienė, R. Kandrotaitė
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Computation of turbulent channel flow with variable spacing riblets
Author: Benhamza, M. E.; Belaid, F.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of thermal stability of holographic plate
Author: Janušas, Giedrius; Palevičius, Arvydas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: An analysis of beam elongation influence to postbuckling displacements under displacement dependent axial forc
Author: Doleček, V.; Isić, Safet; Voloder, A.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of vibrations of a multilayered polymeric film
Author: Ragulskis, Kazimieras; Dabkevičius, Arturas; Kibirkštis, Edmundas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Investigation of contact behaviour of elastic layered spheres by FEM
Author: Garjonis, Jonas; Kačianauskas, R.; Stupak, Eugenius; Vadluga, V.
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Mutual positioning of automatically assembled noncylindrical parts
Author: Bakšys, Bronius; Sokolova, Tatjana
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Intelligent model for painting process and cost forecasting
Author: Mankute, Rasa; Bargelis, Algirdas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Research of quality impact to the product design properties and characteristics
Author: Čikotienė, Dalia; Bargelis, Algirdas
Published: 2009
|
|
Mechanika, Mechanika Volumes 2009: Modeling of sound propagation in the closed space and its interaction with obstacles
Author: Mikalauskas, Robertas; Volkovas, Vitalijus
Published: 2009
|
|
Newsletter
DMG-Lib
Ilmenau TU
