| |
|
Mechanika
Author: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Published: 1995-
|
|
| |
|
Mechanika, Mechanika Volumes 2010: Investigation of fracture of inhomogeneous cast iron specimens
Author: Stupak, Eugenius
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Experimental investigation of in-line tube bundles
Author: Yahiaoui, Tayeb; Adjlout, L.; Imine, O.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Shape optimization of a lightweight tetrapod-like superelement
Author: Verners, Osvalds; Dobelis, Modris
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Elastic analysis of multilayered thick-walled spheres under external load
Author: Borisov, Andrej V.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation of anti-intrusion beams in vehicle side doors
Author: Černiauskas, Egidijus; Keršys, Arturas; Lukoševičius, Vaidas; Sapragonas, Jonas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading
Author: Shariati, M.; Sedighi, M.; Saemi, Jafar; Eipakchi, H. R.; Allahbakhsh, H. R.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation of wear resistance of high velocity oxy-fuel sprayed WC-Co and Cr3C2-NiCr coatings
Author: Zdravecka, Eva; Suchanek, Jan; Tkacova, Jana; Trpcevska, Jarmila; Brinkienė, Kristina
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation of physically nonlinear behaviour of polystyrene packages and their elements
Author: Ragulskis, Kazimieras; Kibirkštis, Edmundas; Dabkevičius, Arturas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Simulation of the part-to-part vibratory alignment under impact mode displacement
Author: Bakšys, Bronius; Baskutienė, J.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Effect of liquid physical properties variability on film thickness
Author: Šinkūnas, Stasys; Kiela, Algimantas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Determination of indicial response for an adaptive hydraulic system by means of the trapeze method
Author: Mihai, I.; Ionescu, M.; Amarandei, D.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Piezoelectric bimorphs for laser shutter systems: optimization of dynamic characteristics
Author: Jurenas, Vytautas; Bansevicius, Ramutis; Navickaite, Sigita
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Analytical solution for penetration of deformable blunt projectiles into the metallic targets
Author: Radmehr, D.; Liaghat, G. H.; Felli, S.; Naderi, D.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Model and test of a modular inspection robotic system
Author: Aluţei, A.; Tătar, Mihai Olimpiu; Cirebea, Claudiu
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Mechanical design and system control of quadruped robot
Author: Vatau, Steliana; Ciupe, Vali; Moldovan, Cristian; Maniu, Inocentiu
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Calibration of the multiangular prism (polygon)
Author: Bručas, D.; Giniotis, Vytautas; Augustinavičius, G.; Stepanovienė, J.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: An experimental and numerical crashworthiness investigation of crash columns assembled by spot-weld
Author: Shariati, M.; Allahbakhsh, H. R.; Saemi, Jafar
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Study of design, kinematics and virtual control of 4 degrees of freedom parallel robot
Author: Verdeş, Dan; Stan, Sergiu-D.; Bălan, Radu; Coman, Mircea
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study
Author: Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Barauskas, Rimantas; Šurna, R.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Estimation of account the flanges in the direct calculation of stress-strain state parameters at normal sections of structural members
Author: Židonis, Ipolitas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The modular principle of design of adaptive film lubrication bearings
Author: Vekteris, Vladas; Mokšin, Vadim
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Time-frequency analysis of the current measurement by hall effect sensors for electric arc welding machine
Author: Akıncı, T.Ç.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Influence of counterbody surface hardness of a friction pair “steel-steel” on tribological behaviour of zinc nanopowder in oil
Author: Jankauskas, Vytenis; Belyaev, S.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Estimation of tool wear of a gun drill using the signal curve pattern of feed force
Author: Sihvo, Inga; Varis, Juha
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation of dependences of stress strain state properties on metal sheet holding force at its forming
Author: Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Real-time parameter identification for highly coupled nonlinear systems using adaptive particle swarm optimization
Author: Sahraei, B. Ranjbar; Nemati, A.; Safavi, A. A.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Analysis of some extreme situations in exploitation of complex rotary systems
Author: Jonušas, Remigijus; Juzėnas, E.; Juzėnas, Kazimieras
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Worm gears with optimized main geometrical parameters and their efficiency
Author: Alexandru, Antal Tiberiu
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Meshless analysis of cracked functionally graded materials under thermal shock
Author: Nazari, M. B.; Shariati, M.; Eslami, M. R.; Hassani, B.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The filler wire - laser beam interaction during laser welding with low alloyed steel filler wire
Author: Salminen, Antti
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Theoretical considerations regarding the virtual modelling of surfaces used in topography
Author: Teuţan, Emil; Bara, M.; Ardelean, Ioan
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Application of GRID computing for optimization of grillages
Author: Šešok, D.; Belevičius, Rimantas; Kačeniauskas, A.; Mockus, J.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Experimental characterization of material structure of piezoelectric PVDF polymer
Author: Ostaševičius, Vytautas; Milašauskaitė, I.; Daukševičius, Rolanas; Baltrušaitis, V.; Grigaliūnas, Viktoras; Prosyčevas, Igoris
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Logbuild - CAD/CAM system for log houses
Author: Portjanski, Leonid; Nekrassov, Grigori; Zahharov, Roman; Ševtšenko, Eduard
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The effect of lubricant rheology on piston skirt/cylinder contact for an internal combustion engine
Author: Kellaci, A.; Mazouzi, R.; Khelidj, B.; Bounif, A.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends
Author: Ghannad, Mehdi; Nejad, Mohammad Zamani
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Effect of lubricant contamination on friction and wear in an EHL sliding contact
Author: Sari, M. R.; Ville, Fabrice; Haiahem, A.; Flamand, Louis
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Statistical evaluation of low cycle stress-strain curves parameters for alloyed structural steels weld metals at room and elevated temperature
Author: Daunys, Mykolas; Stulpinaitė, A.; Šniuolis, R.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Structural optimization in product design process
Author: Povilionis, Audrius; Bargelis, Algirdas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool
Author: Aouici, Hamdi; Yallese, M.A.; Fnides, B.; Mabrouki, Tarek
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Modeling, experimental research and critical parameter analysis of glider’s dynamic characteristics
Author: Rugaitis, Aurimas; Juočas, K.; Volkovas, Vitalijus; Deksnys, Vytautas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Manipulation of a part on a vibrating plane under controlled dry friction
Author: Bakšys, Bronius; Liutkauskienė, K.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Development of cavitation applications for the remediation of contaminated water
Author: Bubulis, Algimantas; Bogorosh, A.T.; Jūrėnas, Vytautas; Voronov, S.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Computational analysis of the magnetorheological fluid loading unit of rowing simulator
Author: Grigas, Vytautas; Kazlauskienė, Kristina; Šulginas, A.; Toločka, R. T.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Impact of manufacturing engineering efficiency to the industry advancement
Author: Bargelis, Algirdas; Mankute, Rasa
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Post-elastic force-displacement dependence of bent and compressed column
Author: Kargaudas, Vytautas; Adamukaitis, Nerijus
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Control of physical surface by detecting coordinates
Author: Skeivalas, Jonas; Čygas, Donatas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation on thermo-acoustical instabilities related to a confined swirling burner
Author: Bode, Florin; Benea, R.; Hodor, Victor
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Numerical investigation of impact behaviour of sandwich fiber reinforced plastic composites
Author: Zeleniakienė, Daiva; Griškevičius, Paulius; Leišis, Vitalis; Milašienė, Daiva
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Diagnostics practice of heavy duty high speed gear transmissions
Author: Barzdaitis, Vytautas; Mazeika, Pranas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Simulation of normal impact of micron-sized particle with elastic-plastic contact
Author: Jasevičius, R.; Tomas, Juergen; Kačianauskas, R.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The experimental research of piezoelectric actuator with two vectors of polarization direction
Author: Lučinskis, Raimundas; Mažeika, Dalius; Hemsel, T.; Bansevičius, Ramutis
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Effect of sensor locations on the solution of inverse Stefan problems
Author: Nejad, A. Abbas; Maghrebi, M. J.; Tabrizi, H. Basirat
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Numerical simulation sequence in applying to facility for sports and entertainment skiing slopes
Author: Samofalov, Michail
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Computation film cooling from three different holes geometries
Author: Khorsi, Azzeddine; Azzi, Abbès
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Numerical analysis of hydrodynamic journal bearing under transient dynamic conditions
Author: Kumar, M. Senthil; Thyla, P. R.; Anbarasu, E.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Pneumatic transport of granular materials over plane using concentrated air flow
Author: Palšauskas, Mecys; Bozys, J.; Jotautienė, Egle
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation of resistance of nuclear fuel cladding to hydride cracking
Author: Makarevičius, V.; Grybėnas, A.; Kriūkienė, Rita
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Effect of explosive loading on mechanical properties of concrete and reinforcing steel: towards developing a predictive model
Author: Vaidogas, E. R.; Juocevičius, Virmantas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Diagnostic research of adaptive hydrodynamic segmental bearings with elastic ring in a rotor system
Author: Vekteris, Vladas; Čereška, Audrius; Jurevičius, Mindaugas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Optimization of the high-speed profile plunge grinding process
Author: Somov, Dmitrij; Bazaras, Zilvinas; Pupleviciute, A.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Influence of structure and mechanical properties for cyclic fracture rates of cast iron
Author: Leonavičius, M. K.; Krenevičius, A.; Bacevičius, Jonas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Strength and fracture criteria application in stress concentrators areas
Author: Žiliukas, Antanas; Surantas, Andrius; Žiogas, Giedrius
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Classic finite elements for simulation of piezoelectric smart structures
Author: Rahmoune, M.; Osmont, Daniel
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The investigation of fuel consumption of the ICE with traditional and modified work cycle
Author: Jakstas, Marijus
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The model of bent threaded connection in three segments
Author: Krenevičius, A.; Juchnevičius, Ž.; Leonavičius, M. K.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Influence of ply orientation on mode I interlaminar fracture toughness of woven carbon and glass composites
Author: Keršienė, Neringa; Žiliukas, Antanas; Keršys, Arturas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Engine working modes during tractors operational period
Author: Janulevičius, Algirdas; Juostas, Antanas; Pupinis, G.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Viscoplasticity coupled with nonlocalized damage for incompatibilities due to strain softening
Author: Pirali, P.; Liaghat, Gh. H.; Ahmadi, M. T.
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Automatic arc welding and overlaying welding of steel using waste materials powder
Author: Ambroza, Petras; Kavaliauskienė, Lina; Pupelis, Edmundas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: The effect of the relative location of laser beam with arc in different hybrid welding processes
Author: Kah, Paul; Salminen, Antti; Martikainen, Jukka
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Investigation of low cycle asymmetric torsion
Author: Daunys, Mykolas; Česnavičius, Ramunas
Published: 2010
|
|
Mechanika, Mechanika Volumes 2010: Optimization of foam filled spot-welded column for the crashworthiness design
Author: Shariati, M.; Saemi, Jafar; Sedighi, M.
Published: 2010
|
|
Newsletter
DMG-Lib
Ilmenau TU
